The Platinum Grey furniture run continues wall-to-wall towards the bath, with the back-to-wall WC and basin sitting flush against the units.
Not every bathroom needs to be gutted back to brick to feel new again. Sometimes the tiles are fine, the layout works, and it's really just the suite and furniture that are letting the room down. That was exactly the brief for a recent project in Two Mile Ash, Milton Keynes, where our customer wanted a proper refresh without the disruption, cost, or time of a full renovation.
What was already working, and what wasn't
The bathroom's existing white metro-style wall tiles, finished with a patterned blue and silver border strip, were in good condition and staying exactly where they were. What wasn't working was the bath. There had been an issue with a leak, and once that needed sorting, it made sense to look at refreshing the rest of the suite and furniture at the same time, without pulling the whole room apart.
The bathroom before the refit, old dark stone-effect floor tiles and the original suite still in place.
What is a bathroom refit, and how is it different from a renovation?
In the trade, this is a bathroom refit: updating or replacing the fixtures and fittings in a room without changing its layout. It's a different job to a full renovation, where the whole room, tiles included, gets stripped back and reconfigured. Here, the bath, WC, basin, floor, and furniture were all replaced, but the wall tiles and layout stayed exactly as they were. That's what keeps a refit faster, less disruptive, and more cost-effective than a full renovation, and it's a genuinely useful option for anyone whose bathroom has good bones but tired fittings.
What actually changed
Rather than lifting the old dark stone-effect ceramic floor tiles, the team laid Karndean's Knight Tile Frosted Marble, a glue-down luxury vinyl floor with a soft marble-effect finish, straight over the top. It's a decision that kept the job faster and far less invasive than a like-for-like ceramic tile replacement would have been, since the existing floor never had to come up.
The suite itself was replaced throughout, starting with a new Baltimore Bath from Bathrooms to Love, fitted with a Qualitex bath screen and a repositioned tap. Rather than sitting next to the basin as before, the taps moved to the shower end of the bath. It's a small change, but a sensible one: it freed up space where the two fixtures used to crowd each other, and it means any future plumbing work is easier to access.
A closer look at the repositioned bath taps, now at the shower end for easier access, alongside the Platinum Grey bath panel and marble-effect step.
There's a practical detail behind that bath choice too: the bath's width was constrained by a boxed-in stairwell running alongside it, so the choice of bath had to work within that limitation, not something every bathroom has to plan around.
The WC, from Bathrooms to Love, sits back-to-wall with a Geberit concealed cistern and push-button flush, built into a new run of Qualitex Genesis Q-Line furniture in Platinum Grey, chosen to match fixtures elsewhere in the room that weren't being replaced. That furniture runs wall-to-wall with no awkward gaps, topped with a Deuco Athena Marble White worktop, and a new basin and mirror finish the room off.
Storage had been a weak point in the old bathroom, and the new fitted furniture addressed that directly, giving the room proper storage it simply didn't have before.
The finished bathroom, new Platinum Grey furniture, worktop, and back-to-wall WC, alongside the refitted bath with shower screen and Alder mirror.
How long did it take, and what did it cost?
The job was booked in for two weeks, our standard allowance for a bathroom project, but with less strip-out work involved than a full renovation, it was finished sooner than that. The total cost came to just over £4,000, a helpful benchmark for anyone weighing up whether a part-renovation could work for their own bathroom.
Is a bathroom refit right for your bathroom?
If your layout works for you and the room's structure is sound, but the suite, floor, or furniture is looking dated or something's gone wrong with the bath or WC, a part-renovation is worth considering. It keeps costs down, cuts the time you're without a working bathroom, and still gives the room a genuinely fresh feel.
This is exactly the kind of project our design service is built for. We'll come and measure up, put together full plans and elevations, and work out the details that make a job like this run smoothly, radiator dimensions, valve positions, and anything else a fitter needs to know before they start. You're welcome to bring your own fitter along, or we can recommend someone from our network of trusted tradespeople. Either way, we're on hand throughout the job to answer any questions that come up on site.
We work with homeowners across Milton Keynes and beyond, including Buckinghamshire, Bedfordshire, and Northamptonshire, as well as further afield in Hertfordshire and Oxfordshire. If this sounds like the kind of refresh your bathroom needs, get in touch or visit our showroom to talk through what's possible.
